| Operating Temperature |
-
30 ~ +100  C
( Contain Heating coil ) |
| Appearance Inspection | No external defects by visual inspection |
| Terminal Strength |
After soldering , between copper plate and terminals of coil , push in two directions of X ,Y with standing as below conditions . Terminal should not peel off . 10.0N 10sec. SI-0403 SI-0504 15.0N 10sec. SI-0703 SI-0705 20.0N 10sec. SI-1005 |
| Insulating resistance |
Over 100Mohm at 100V D.C. between wire and core. |
| Dielectric Strength | No dielectric breakdown at 100V D.C. for 1 minute between wire and core. |
| Humidity characteristics |
Inductance deviation with +- 5% after 96 hours in 90~95% relative humidity at
40+-
2 |
| Vibration resistance |
Inductance deviation within +-5% after vibration for 1 hour. In each of three orientations at swelp vibration (10~55~10Hz)with 1.5mm p-p amplitude. |